DJI Goggles 3

High-definition Micro-OLED screens, Real View PiP and diopter adjustment provide a clear, comfortable and safer FPV experience during a long session. 1080p Micro-OLED, up to 100 Hz refresh, up to 3 hours of battery and one-click defogging.

Category: Consumer Drone Accessories Tags: Accessory, Consumer Drones, DJI, FPV, Goggles 3

DJI • Micro-OLED Professional FPV Goggles

DJI Goggles 3

Premium FPV display with dual Micro-OLED 1080p screens, 100Hz, Real View PiP, diopter/IPD adjustment and O4 latency as low as 24ms.

Model

TKGS3

Weight

Approx 470g, with battery

Size

170 × 109 × 112 mm, antennas folded

Screen

2 × 0.49″ Micro-OLED

Every screen size

1920 × 1080

Refresh rate

up to 100 Hz

Product details

Camera and image quality

0.49″ 1920 × 1080 Micro-OLED panel for each eye provides up to 100 Hz refresh, 700 nits brightness and 50,000:1 contrast ratio. The 44° FOV strikes a balance between sharp imaging and peripheral vision.

Flight performance

O4 with DJI Avata 2 supports 1080p/100fps live video and fast FPV control with low latency up to 24ms. The transmission distance with Avata 2 can be up to 13 km FCC or 10 km CE/SRRC/MIC.

Security and Management

Real View PiP helps to see the surroundings without taking off the glasses; it is convenient for takeoff, landing and equipment adjustment. -6.0 D to +2.0 D diopter and 56-72 mm IPD setting are more user-friendly.

Professional workflow

AR Cursor, Head Tracking, wireless streaming, panoramic and 3D video playback extend the premium FPV experience. microSD screen recording is useful for training and analysis with flight telemetry.

What tasks is it suitable for?

High Speed FPV with DJI Avata 2
Movie style flight with Head Tracking
Safer setup with Real View PiP
3D and panoramic media viewing

Kit

DJI Goggles 3
Headband
Additional forehead pad
Vision correction lenses/accessories
USB-C cable
Documents

Exact content varies depending on whether Standard, Fly More, Creator, or other regional package is selected.

Recommended equipment

DJI RC Motion 3
DJI FPV Remote Controller 3
microSD V30 card
Goggles 3 Foam Padding
DJI Avata 2
DJI Neo and compatible drones

Important notes before purchasing

Flight distance, time, speed and sensing results are maximum values measured by DJI under laboratory conditions. Actual performance depends on wind, temperature, altitude, radio interference, payload, battery status, and firmware version.

Before flying, check the applicable aviation, registration, privacy and airspace regulations of Uzbekistan and the area of departure. Sensor and Return-to-Home do not replace operator responsibility.

Official DJI Technical Data →

Drone service recommendation: choose the right remote control, battery quantity, memory card, filter and service package according to your task. Confirm the package with the manager before ordering.

Goggles

Model	TKGS3
Weight	Approx. 470 g (battery included)
Dimensions (L×W×H)	With antennas folded: 170×109×112 mm (L×W×H) With antennas unfolded: 205×109×112 mm (L×W×H)
Screen Size (single screen)	0.49 inch
Resolution (single screen)	1920×1080
Refresh Rate	Up to 100 Hz
Interpupillary Distance Range	56-72 mm
Diopter Adjustment Range	-6.0 D to +2.0 D
FOV (single screen)	44°
Video Recording Format	MOV
Supported Video and Audio Playback Formats	MP4, MOV (video coding formats: H.264, H.265; audio formats: AAC, PCM) Panoramic Video: Spherical 2D panoramic videos. 3D Video: Half-Side-by-Side (HSBS), Full-Side-by-Side (FSBS), Half Over-Under (HOU), Full Over-Under (FOU). Max Video Specification: 4K/60fps
Real View FOV	44°
Operating Temperature	-10°C to 40°C (14°F to 104°F)
Power Input	Built-in battery
Supported SD Cards	microSD (up to 512 GB)
Recommended microSD Cards	Kingston CANVAS Go! Plus 64GB U3 A2 V30 microSDXC Kingston CANVAS Go! Plus 128GB U3 A2 V30 microSDXC Kingston CANVAS Go! Plus 256GB U3 A2 V30 microSDXC Kingston CANVAS Go! Plus 512GB U3 A2 V30 microSDXC Lexar Professional 1066x 64GB U3 A2 V30 microSDXC Lexar Professional 1066x 128GB U3 A2 V30 microSDXC Lexar Professional 1066x 256GB U3 A2 V30 microSDXC Lexar Professional 1066x 512GB U3 A2 V30 microSDXC

Video Transmission

Video Transmission	When used with different aircraft, the goggles will automatically select the corresponding firmware to match the video transmission specification of the aircraft. With DJI Avata 2: DJI O4
Operating Frequency	2.4000-2.4835 GHz 5.150-5.250 GHz 5.725-5.850 GHz
Transmitter Power (EIRP)	2.4 GHz: < 33 dBm (FCC) < 20 dBm (CE/SRRC/MIC) 5.1 GHz: < 23 dBm (CE) 5.8 GHz: < 33 dBm (FCC) < 30 dBm (SRRC) < 14 dBm (CE)
Latency	With DJI Avata 2: 1080p/100fps video transmission quality: latency down to 24 ms ‌1080p/60fps video transmission quality: latency down to 40 ms
Max Transmission Distance	When used with DJI Avata 2, DJI Goggles 3 can achieve the following max video transmission distance: 13 km (FCC); 10 km (CE/SRRC/MIC)
Max Video Bitrate	60 Mbps

Wi-Fi

Protocol	802.11 a/b/g/n/ac
Operating Frequency	2.4000-2.4835 GHz 5.170-5.250 GHz 5.725-5.850 GHz
Transmitter Power (EIRP)	2.4 GHz: < 20 dBm (FCC/CE/SRRC/MIC) 5.1 GHz: < 20 dBm (FCC/CE/MIC) 5.8 GHz: < 20 dBm (FCC/SRRC) < 14 dBm (CE)

Bluetooth

Protocol	Bluetooth 5.0
Operating Frequency	2.400-2.4835 GHz
Transmitter Power (EIRP)	< 10 dBm

GFSK

Operating Frequency	2.4000-2.4835 GHz
Transmitter Power (EIRP)	< 26 dBm (FCC) < 20 dBm (CE/SRRC/MIC)

Battery

Dimensions	121×65×52.5 mm (L×W×H)
Capacity	3000 mAh
Voltage	5.6-8.4 V
Category	Li-ion
Chemical System	LiNiMnCoO2
Energy	21.6 Wh
Charging Temperature	0° C to 50° C (32° F to 122° F)
Max Charging Power	20 W (charging when powered off)
Runtime	Approx. 3 hours

Package contents vary with the selected configuration. Confirm the item list and quantities with our team before ordering. Items without a verified component photo are listed by name.

DJI Goggles 3 × 1

DJI Goggles 3 -2.0D Corrective Lenses (Pair) × 1

USB-C OTG Cable × 1

Compatible accessories. Ordered separately; confirm price and availability.

The accessory list for this model is being verified. Include the accessory name in your enquiry.

Reviews

There are no reviews yet.

Be the first to review “DJI Goggles 3”

DJI Goggles 3 — Questions & Answers

What are the key specifications of this model?

Model: TKGS3
Weight: Approx. 470 g (battery included)
Dimensions (L×W×H): With antennas folded: 170×109×112 mm (L×W×H) With antennas unfolded: 205×109×112 mm (L×W×H)
Screen Size (single screen): 0.49 inch

See Specifications for the full table and operating limitations.

Are package contents and accessories the same?

No. Package Contents describes the selected kit, while Accessories covers separately selected equipment. Confirm the exact battery, controller and charger models and quantities before ordering.

How should I check compatibility?

Provide the full product name, version and models of your existing equipment. A matching connector is not sufficient: power requirements, firmware and the manufacturer’s compatibility list must also be checked.

How do I request an order?

Select Place an Order and enter your name, phone number, quantity and preferred configuration. Sending a request is not a payment; price, availability and final contents are confirmed separately.

DJI Goggles 3

DJI Goggles 3