Payloads

DJI Zenmuse S1

A professional overhead light that helps you perform safer search, inspection and emergency tasks in the dark.

Category: Payloads

DJI Payload • Powerful searchlight for Matrice 400

Zenmuse S1

To illuminate a distant object, assist the zoom camera and speed up the night search mission.

Lighting distance

up to 500m

Illumination at 100 m

40 lux, with M400

Modes

Low, High, Both and Strobe

Protection

IP54

Platform

DJI Matrix 400

Management

Real time from remote

Product details

Platform and capabilities

The Zenmuse payload integrates sensor, stabilization, time synchronization and drone telemetry into a single data stream. The correct payload selection is determined by the required accuracy, range, illumination and final deliverable.

Performance and output quality

Result depends on flight altitude, speed, overlap, object material, atmosphere, lighting and platform. Before the mission, it is recommended to take a test recording and check the focus, exposure, return and storage parameters.

Safety and reliability

Payload weight and aerodynamics affect flight reserve. During installation, gimbal lock, contacts, firmware compatibility and calibration are checked; laser, thermal or strong lighting functions are used in accordance with local safety regulations.

Professional workflow

Result Type determined, appropriate drone and payload attached, firmware/calibration checked, mission parameters entered. After the flight, file integrity, geotag, time synchronization and quality are checked, then processing and reporting are performed.

Specifications

Lighting distance	up to 500m
Illumination at 100 m	40 lux, with M400
Modes	Low, High, Both and Strobe
Protection	IP54
Platform	DJI Matrix 400
Management	Real time from remote
Task	Night search and inspection
Integration	Coordinated with camera orientation

What tasks is it suitable for?

Night search and rescue
Power line and building inspection
Emergency scene lighting
Public Safety Operation

Recommended operating procedure

1.Clearly define the task and expected outcome
2.Check flight area, weather, communications and risk factors
3.Select appropriate payload/module, battery and mission parameters
4.After a short test and pre-flight checklist, complete the main mission
5.Check the file, telemetry and output quality and archive the report

Set contents: is shown in pictures under “Assembly”.

Compatible equipment and ecosystem

Compatible Matrice enterprise platform
High speed memory card or storage
DJI Terra / FlightHub 2 workflow
D-RTK 2 or NTRIP
Extra batteries
Calibration and service services

Implementation and maintenance

When the equipment is received, the firmware, serial number, battery status, sensor and mechanical parts are checked. A pre-flight checklist is performed before each work day, and a cleanup, file backup, and failure log are performed after the job is completed.

For a professional system, operator training, spare parts, seasonal service, battery maintenance routines and an emergency plan should be considered as part of the operation package.

Important notes before purchasing

The flight, distance, range, current and accuracy values shown are maximum or typical results under manufacturer test conditions. Actual performance depends on configuration, weather, altitude, material, payload, radio interference, and software version.

Before starting work, check the applicable aviation, registration, radio, privacy, chemical-handling and occupational-safety requirements in Uzbekistan and the intended operating area.

DJI Official Product Information →

Drone service recommendation: choose a kit not just by model name, but by task, output format, daily coverage, number of operators, battery cycle and service plan. Confirm the final configuration with the manager before ordering.

General

Product Name	Zenmuse S1
Weight	760±10 g
Dimensions	125×152×171 mm (L×W×H)
Rated Power	120 W (Matrice 400) 68 W (Matrice 300 RTK/Matrice 350 RTK)
Supported Aircraft	Matrice 400 Matrice 350 RTK Matrice 300 RTK (requires DJI RC Plus)
Eye Safety Class	IEC 62471: Risk Group 1
Shell Temperature	<50° C (122° F, plastic shell)
Ingress Protection Rating	IP54

Environment

Operating Temperature	-20° to 40° C (-4° to 104° F)
Storage Temperature	-20° to 60° C (-4° to 140° F)

Gimbal

Stabilization System	3-axis (tilt, roll, pan)
Angular Vibration Range	Hover: ±0.01° Flight: ±0.02°
Mounting	Detachable DJI SKYPORT
Mechanical Range	Tilt: -129° to +73° Roll: ±55.8° Pan: ±327°
Controllable Range	Tilt: -120° to +60° Pan: ±320°
Operation Mode	Follow / Free / Re-center

Illuminance

Maximum Central Illuminance	40 lux @ 100 m (Matrice 400, Both On mode) 35 lux @ 100 m (Matrice 300 RTK/Matrice 350 RTK, Both On mode)
Low Beam Central Illuminance	20 lux @ 100 m (Matrice 400, Low Beam mode) 13 lux @ 100 m (Matrice 300 RTK/Matrice 350 RTK, Low Beam mode)
High Beam Central Illuminance	30 lux @100 m (High Beam mode)
Effective Illumination Angle	15±1° (10% relative illuminance, Low Beam mode and Both On mode) 4±0.5° (10% relative illuminance, High Beam mode)
Typical Color Temperature	6500K typical value (Low Beam mode) 7500K typical value (High Beam mode)
Dimming Mode	Analog dimming
Effective Illumination Distance	500 m (Both On mode)

Basic Features

Lighting Control	Turning light on/off, brightness adjustment
Strobe Mode	5 Hz strobe
Lighting Mode	Low Beam mode, High Beam mode, Both On mode
Remote Controller Buttons	Can be set for turning the light on/off, brightness adjustment, or lighting mode changes
Gimbal Synchronization	Supports synchronized control with other gimbal-equipped payloads

Special Features

Eye Protection	Automatically limits brightness to 40% when not in flight
Payload Protection	LED, LEP temperature protection, overcurrent protection, and power protection to prevent damage.
Synchronized Control	When two Zenmuse S1 are mounted on Matrice 400, both spotlights can be controlled at the same time.
Intelligent Beam Alignment	When used with the Zenmuse H30 Series on Matrice 400, Zenmuse S1 employs gimbal synchronization to automatically align the spotlight beam with the camera view.

Package contents vary with the selected configuration. Confirm the item list and quantities with our team before ordering. Items without a verified component photo are listed by name.

Zenmuse S1 spotlight × 1

Lens protection cover × 1

Carrying case × 1

Lens cleaning cloth × 1

Compatible accessories. Ordered separately; confirm price and availability.

The accessory list for this model is being verified. Include the accessory name in your enquiry.

Reviews

There are no reviews yet.

Be the first to review “DJI Zenmuse S1”

DJI Zenmuse S1 — Questions & Answers

What are the key specifications of this model?

Product Name: Zenmuse S1
Weight: 760±10 g
Dimensions: 125×152×171 mm (L×W×H)
Rated Power: 120 W (Matrice 400) 68 W (Matrice 300 RTK/Matrice 350 RTK)

See Specifications for the full table and operating limitations.

Are package contents and accessories the same?

No. Package Contents describes the selected kit, while Accessories covers separately selected equipment. Confirm the exact battery, controller and charger models and quantities before ordering.

How should I check compatibility?

Provide the full product name, version and models of your existing equipment. A matching connector is not sufficient: power requirements, firmware and the manufacturer’s compatibility list must also be checked.

How do I request an order?

Select Place an Order and enter your name, phone number, quantity and preferred configuration. Sending a request is not a payment; price, availability and final contents are confirmed separately.

DJI Zenmuse S1

Zenmuse S1